{"title":"Flashforge","description":null,"products":[{"product_id":"flashforge-pla-basic-3d-printing-filament-1-75mm-1kg-roll-black-90004237002","title":"Flashforge PLA Basic 3D Printing Filament 1.75mm 1kg Roll - Black | 90004237002","description":"\u003cul\u003e\n\u003cli\u003e1.75mm PLA filament on a 1kg spool - Black\u003c\/li\u003e\n\u003cli\u003eDiameter tolerance ±0.03mm via CCD measurement\u003c\/li\u003e\n\u003cli\u003eBubble-Free extrusion and Neat Winding for tangle-free printing\u003c\/li\u003e\n\u003cli\u003eNozzle temperature 190-240°C, print speeds up to 250mm\/s\u003c\/li\u003e\n\u003cli\u003eCompatible with Bambu Lab, Creality, Flashforge and most FFF printers\u003c\/li\u003e\n\u003cli\u003ePlant-based, biodegradable material from renewable resources\u003c\/li\u003e\n\u003cli\u003eRoHS, REACH, and SDS certified\u003c\/li\u003e\n\u003cli\u003eBatch-tested on a 48-hour continuous print for quality assurance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Spool diameter: 200mm, hub hole: 52mm, spool width: 76mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFlashforge PLA Basic 1.75mm PLA Filament for 3D Printers\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eA reliable PLA filament for everyday 3D printing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlashforge PLA Basic is a 1.75mm diameter filament wound onto a 1kg spool, produced from renewable plant-based materials including cornstarch. It is RoHS, REACH, and SDS certified, making it one of the more responsibly sourced options in the standard filament category. Low odour and minimal warping make it a practical choice for beginners and experienced users alike.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConsistent diameter for clean, reliable extrusion:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlashforge manufactures PLA Basic in a dust-free workshop, using CCD (charge-coupled device) diameter measurement and self-adaptive control systems to keep 99% of the filament within a 1.75mm tolerance of ±0.03mm. The result is Bubble-Free extrusion, reduced nozzle clogging, and Neat Winding on the spool to prevent tangles during printing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTested under real printing conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery batch of Flashforge PLA Basic is tested by printing a large 3D model that requires a minimum of 48 hours of continuous printing at the thinnest layer height. This ensures the filament feeds consistently from start to finish, without mid-print failures that can waste both time and material.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWorks with most FFF 3D printers on the market:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePLA Basic is compatible with all FFF (Fused Filament Fabrication) printers that accept 1.75mm filament, including models from Bambu Lab (A1, P1, and X1 series) and Creality (K1C and Ender series), as well as Flashforge's own machines. The recommended nozzle temperature range of 190-240°C covers a wide variety of printer profiles, with higher temperatures recommended at faster print speeds.\u003c\/p\u003e\n\n\u003cp\u003eShop the full \u003ca href=\"\/collections\/printers\" style=\"color: #2B00FF;\"\u003ePrinters range\u003c\/a\u003e from Heavins.ie, with delivery available across Ireland.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e\n\u003cstrong\u003eFilament Diameter\u003c\/strong\u003e - 1.75mm ±0.03mm, maintained via CCD measurement systems.\u003cbr\u003e\n\u003cstrong\u003eBubble-Free Extrusion\u003c\/strong\u003e - manufacturing controls reduce air pockets for consistent flow through the nozzle.\u003cbr\u003e\n\u003cstrong\u003eNeat Winding\u003c\/strong\u003e - spool is wound uniformly to prevent tangling and feeding issues during long prints.\u003cbr\u003e\n\u003cstrong\u003eLow Warping\u003c\/strong\u003e - PLA material properties keep parts flat on the build plate without an enclosure.\u003cbr\u003e\n\u003cstrong\u003eLow Odour\u003c\/strong\u003e - suitable for use in home, school, and office environments.\u003cbr\u003e\n\u003cstrong\u003ePlant-Based Material\u003c\/strong\u003e - produced from renewable resources including cornstarch; biodegradable.\u003cbr\u003e\n\u003cstrong\u003eWide Compatibility\u003c\/strong\u003e - works with Bambu Lab, Creality, Flashforge, and other FFF printers using 1.75mm filament.\u003cbr\u003e\n\u003cstrong\u003e48-Hour Print Test\u003c\/strong\u003e - every batch is tested on a large model printed at minimum layer height for quality assurance.\u003cbr\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e - RoHS, REACH, and SDS certified.\u003cbr\u003e\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFilament material: PLA (Polylactic Acid)\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 1.75mm ±0.03mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 1kg (2.2 lb)\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle temperature: 190-240°C\u003c\/li\u003e\n\u003cli\u003eRecommended build plate temperature: 25-60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle diameter: 0.4mm (0.6mm also compatible)\u003c\/li\u003e\n\u003cli\u003eLayer height: 0.12-0.3mm\u003c\/li\u003e\n\u003cli\u003ePrinting speed: 40-250mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling fan: 50-100%\u003c\/li\u003e\n\u003cli\u003eRetraction length: 1-2mm\u003c\/li\u003e\n\u003cli\u003eRetraction speed: 30-50mm\/s\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature (HDT @ 0.455 MPa): 53°C (ISO 75)\u003c\/li\u003e\n\u003cli\u003eTensile strength (X-Y): 45-49 MPa (ISO 527)\u003c\/li\u003e\n\u003cli\u003eFlexural strength (X-Y): 69-75 MPa (ISO 178)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.25-1.26 g\/cm³ (ISO 1183)\u003c\/li\u003e\n\u003cli\u003eWater absorption (23°C\/24h): less than 0.3% (ISO 62)\u003c\/li\u003e\n\u003cli\u003eDrying conditions: 55°C for 8 hours (convection oven)\u003c\/li\u003e\n\u003cli\u003eStorage: room temperature to 40°C, 20% RH or below, sealed with desiccant\u003c\/li\u003e\n\u003cli\u003eSpool diameter: 200mm\u003c\/li\u003e\n\u003cli\u003eSpool hub hole: 52mm\u003c\/li\u003e\n\u003cli\u003eSpool width: 76mm\u003c\/li\u003e\n\u003cli\u003eCompatible support materials: self-supporting, PVA, BVOH\u003c\/li\u003e\n\u003cli\u003eCertifications: RoHS, REACH, SDS\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Flashforge PLA Basic filament spool, 1.75mm, 1kg - Black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":57759326568821,"sku":"6937120314622","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/5261\/5816\/files\/heavins-flashforge-pla-basic-3d-printing-filament-1-75mm-1kg-roll-black-90004237002-01.jpg?v=1794484304"},{"product_id":"flashforge-basic-3d-printing-filament-1-75mm-1kg-roll-white-90004236002","title":"Flashforge Basic 3D Printing Filament 1.75mm 1kg Roll - White | 90004236002","description":"\u003cul\u003e\n\u003cli\u003ePLA Basic filament - 1.75mm diameter, 1kg spool in White\u003c\/li\u003e\n\u003cli\u003eNozzle temperature 190-240°C, build plate 25-60°C\u003c\/li\u003e\n\u003cli\u003eDiameter tolerance ±0.03mm for consistent extrusion\u003c\/li\u003e\n\u003cli\u003eLow warp, low odour - suitable for open-frame printers\u003c\/li\u003e\n\u003cli\u003eNeat winding reduces tangles during long print runs\u003c\/li\u003e\n\u003cli\u003eBubble-free extrusion with less nozzle clogging\u003c\/li\u003e\n\u003cli\u003eCompatible with Flashforge, Bambu Lab, Creality and other 1.75mm FDM printers\u003c\/li\u003e\n\u003cli\u003ePlant-derived and biodegradable PLA material\u003c\/li\u003e\n\u003cli\u003eRoHS certified\u003c\/li\u003e\n\u003cli\u003ePrinting speed range 40-250mm\/s\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFlashforge PLA Basic 3D Printing Filament for FDM Printers\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eA reliable everyday filament for FDM printing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Flashforge PLA Basic filament is a 1kg spool of 1.75mm PLA designed to suit a broad range of FDM 3D printers. It runs at a nozzle temperature of 190-240°C with a build plate temperature of 25-60°C, making it one of the more straightforward materials to work with. The filament is manufactured from polylactic acid, a plant-derived and biodegradable material, and produces low odour during printing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConsistent diameter and clean extrusion:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlashforge specifies a diameter tolerance of ±0.03mm on this filament, which supports steady extrusion and reduces the risk of under- or over-extrusion mid-print. The spool is neatly wound to help avoid tangles during longer print runs. Users across the PLA Basic range report bubble-free performance and less nozzle clogging compared with lower-grade filaments.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBroad printer compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis filament is compatible with any FDM printer that accepts 1.75mm filament, including Flashforge's own Adventurer 5M and Adventurer 5M Pro, as well as cross-brand machines such as Bambu Lab A1, P1 and X1 series and Creality K1C and Ender series. No enclosed print chamber is required. It is suited to beginners learning FDM printing as well as experienced users producing prototypes, teaching aids and detailed models.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eStorage and drying guidance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor best results, store the filament sealed with a desiccant at room temperature up to 40°C and at relative humidity no greater than 20%. If the filament has absorbed moisture, Flashforge recommend drying it at 55°C for 8 hours in a convection oven before printing. Proper storage helps maintain print quality and reduces stringing.\u003c\/p\u003e\n\n\u003cp\u003eShop the full \u003ca href=\"\/collections\/printers\" style=\"color: #2B00FF;\"\u003ePrinters range\u003c\/a\u003e from Heavins.ie, with delivery available across Ireland.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e - PLA (Polylactic Acid), plant-derived and biodegradable.\u003cbr\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e - 1.75mm with a tolerance of ±0.03mm for consistent extrusion.\u003cbr\u003e\n\u003cstrong\u003eNozzle temperature range\u003c\/strong\u003e - 190-240°C to suit a wide range of FDM print settings.\u003cbr\u003e\n\u003cstrong\u003eBuild plate temperature\u003c\/strong\u003e - 25-60°C; no heated enclosure required.\u003cbr\u003e\n\u003cstrong\u003ePrinting speed\u003c\/strong\u003e - 40-250mm\/s (higher speeds benefit from higher temperatures).\u003cbr\u003e\n\u003cstrong\u003eLow warp and low odour\u003c\/strong\u003e - well-suited to open-frame printers and indoor use.\u003cbr\u003e\n\u003cstrong\u003eNeat winding\u003c\/strong\u003e - spool is wound to reduce tangles during long print runs.\u003cbr\u003e\n\u003cstrong\u003eBubble-free extrusion\u003c\/strong\u003e - consistent flow with less nozzle clogging reported across the range.\u003cbr\u003e\n\u003cstrong\u003eBroad compatibility\u003c\/strong\u003e - works with Flashforge, Bambu Lab, Creality and other 1.75mm FDM printers.\u003cbr\u003e\n\u003cstrong\u003eRoHS certified\u003c\/strong\u003e - complies with RoHS regulations.\u003cbr\u003e\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: PLA (Polylactic Acid)\u003c\/li\u003e\n\u003cli\u003eColour: White\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 1.75mm\u003c\/li\u003e\n\u003cli\u003eDiameter tolerance: ±0.03mm\u003c\/li\u003e\n\u003cli\u003eSpool weight: 1kg (net filament weight)\u003c\/li\u003e\n\u003cli\u003eNozzle temperature: 190-240°C\u003c\/li\u003e\n\u003cli\u003eBuild plate temperature: 25-60°C\u003c\/li\u003e\n\u003cli\u003ePrinting speed: 40-250mm\/s\u003c\/li\u003e\n\u003cli\u003eRetraction length: 1-2mm\u003c\/li\u003e\n\u003cli\u003eRetraction speed: 30-50mm\/s\u003c\/li\u003e\n\u003cli\u003eLayer height: 0.12-0.3mm\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle diameter: φ0.4mm (φ0.6mm also compatible)\u003c\/li\u003e\n\u003cli\u003eCooling fan: 50-100%\u003c\/li\u003e\n\u003cli\u003eHeat Deflection Temperature (HDT @ 0.455 MPa): 53°C\u003c\/li\u003e\n\u003cli\u003eTensile strength (X-Y): 45-49 MPa (ISO 527)\u003c\/li\u003e\n\u003cli\u003eFlexural strength (X-Y): 69-75 MPa (ISO 178)\u003c\/li\u003e\n\u003cli\u003eElongation at break (X-Y): 13.5-15.5% (ISO 527)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.25-1.26 g\/cm³ (ISO 1183)\u003c\/li\u003e\n\u003cli\u003eMelt Flow Rate: 4-8 g\/10 min (ISO 1133)\u003c\/li\u003e\n\u003cli\u003eWater absorption (23°C\/24h): less than 0.3% (ISO 62)\u003c\/li\u003e\n\u003cli\u003eStorage conditions: sealed with desiccant, room temperature to 40°C, ≤20% RH\u003c\/li\u003e\n\u003cli\u003eDrying before printing: 55°C for 8 hours (convection oven)\u003c\/li\u003e\n\u003cli\u003eCompatible printer types: 1.75mm FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eCertifications: RoHS\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Flashforge PLA Basic Filament spool - White, 1.75mm, 1kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":57759341150581,"sku":"6937120314615","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/5261\/5816\/files\/heavins-flashforge-basic-3d-printing-filament-1-75mm-1kg-roll-white-90004236002-01.jpg?v=1794484308"},{"product_id":"flashforge-adventurer-5m-corexy-3d-printer-black-10001135001","title":"Flashforge Adventurer 5M CoreXY 3D Printer - Black | 10001135001","description":"\u003cul\u003e\n\u003cli\u003ePrint speed up to 300 mm\/s with 600 mm\/s travel speed\u003c\/li\u003e\n\u003cli\u003e220 x 220 x 220 mm build volume for a wide range of projects\u003c\/li\u003e\n\u003cli\u003eFull-auto one-click bed levelling via ADM - no manual calibration\u003c\/li\u003e\n\u003cli\u003eQuick-detach nozzle swaps in around 3 seconds, no tools needed\u003c\/li\u003e\n\u003cli\u003eCoreXY all-metal frame with Vibration Suppression Algorithm for clean prints\u003c\/li\u003e\n\u003cli\u003eFlexible double-sided PEI steel plate - prints release by flexing the plate\u003c\/li\u003e\n\u003cli\u003eWi-Fi, Ethernet, and USB connectivity with cloud printing via FlashMaker app\u003c\/li\u003e\n\u003cli\u003e4.3-inch colour touch LCD screen for on-device control\u003c\/li\u003e\n\u003cli\u003ePower-loss recovery and filament run-out reminder included\u003c\/li\u003e\n\u003cli\u003eArrives 95% pre-assembled - ready to print in around 10 minutes\u003c\/li\u003e\n\u003cli\u003eCompatible with PLA, PETG, TPU, PLA-CF, and PETG-CF filaments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer warranty:\u003c\/strong\u003e 1 year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 413 x 363 x 376 mm (HxWxD, excluding display and spool holder)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFlashforge Adventurer 5M - a Fast, Easy-to-Use desktop 3d printer for Home and Studio\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpeed and precision in a solid all-metal frame:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Adventurer 5M uses a CoreXY all-metal structure with Flashforge's own Vibration Suppression Algorithm to maintain clean, accurate prints at high speeds. Maximum print speed reaches 300 mm\/s, with a top travel speed of 600 mm\/s and acceleration up to 20,000 mm\/s² - all within a generous 220 x 220 x 220 mm build volume. Layer thickness is adjustable from 0.1 to 0.4 mm, giving you control over detail and print time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAuto-levelling and quick-change nozzles make setup straightforward:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ADM (Automatic Datum Management) system handles full-auto one-click bed levelling before every print, so there is no manual calibration needed. The quick-detach nozzle swaps in around 3 seconds without tools, and four diameters - 0.25 mm, 0.4 mm, 0.6 mm, and 0.8 mm - are supported to suit different filaments and detail levels. The 50W nozzle heater reaches 200°C in 35 seconds, and the nozzle flows up to 32 mm³\/s.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eReady to print in around 10 minutes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Adventurer 5M arrives 95% pre-assembled, meaning most users are up and running in roughly 10 minutes straight out of the box. The double-sided flexible PEI steel print plate sits on a heated bed that reaches up to 100°C, and finished prints release cleanly by flexing the plate. Connectivity covers Wi-Fi, Ethernet, and USB, with cloud printing and remote monitoring available via the FlashMaker app.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible filaments and slicing software:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsing the standard 0.4 mm nozzle, the Adventurer 5M works with PLA and PETG. Switching to the 0.6 mm nozzle opens up TPU, PLA-CF, and PETG-CF. Supported slicing software includes FlashPrint 5, Orca-Flashforge, and Orca Slicer, with compatibility extending to PrusaSlicer and Cura. The slicer runs on Windows 7 and above, Mac OS X 10.7 and above, and Ubuntu 12.04 and above. Input files can be STL, OBJ, or 3MF format.\u003c\/p\u003e\n\n\u003cp\u003eShop the full \u003ca href=\"\/collections\/printers\" style=\"color: #2B00FF;\"\u003ePrinters range\u003c\/a\u003e from Heavins.ie, with delivery available across Ireland.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e\n\u003cstrong\u003eCoreXY All-Metal Frame\u003c\/strong\u003e - rigid structure reduces vibration for accurate high-speed prints.\u003cbr\u003e\n\u003cstrong\u003e300 mm\/s Max Print Speed\u003c\/strong\u003e - with 600 mm\/s travel speed and 20,000 mm\/s² acceleration.\u003cbr\u003e\n\u003cstrong\u003eADM Auto-Levelling\u003c\/strong\u003e - full-auto one-click bed levelling before every print, no manual adjustment.\u003cbr\u003e\n\u003cstrong\u003eQuick-Detach Nozzle\u003c\/strong\u003e - 3-second tool-free nozzle swap in four diameters: 0.25, 0.4, 0.6, and 0.8 mm.\u003cbr\u003e\n\u003cstrong\u003eVibration Suppression Algorithm\u003c\/strong\u003e - Flashforge self-developed algorithm reduces ghosting at high speeds.\u003cbr\u003e\n\u003cstrong\u003eDouble-Sided PEI Steel Plate\u003c\/strong\u003e - flexible removable plate; prints release cleanly by flexing.\u003cbr\u003e\n\u003cstrong\u003eDual-Channel Cooling\u003c\/strong\u003e - turbo fan with dual air ducts for rapid model cooling.\u003cbr\u003e\n\u003cstrong\u003eWi-Fi, Ethernet, and USB Connectivity\u003c\/strong\u003e - supports cloud printing and remote monitoring via FlashMaker app.\u003cbr\u003e\n\u003cstrong\u003e4.3-Inch Touch LCD Screen\u003c\/strong\u003e - colour touchscreen for on-device control.\u003cbr\u003e\n\u003cstrong\u003ePower-Loss Recovery\u003c\/strong\u003e - resumes printing after an unexpected power interruption.\u003cbr\u003e\n\u003cstrong\u003eFilament Run-Out Reminder\u003c\/strong\u003e - pauses the print and alerts you when filament runs low.\u003cbr\u003e\n\u003cstrong\u003e95% Pre-Assembled\u003c\/strong\u003e - most users are printing within approximately 10 minutes of unboxing.\u003cbr\u003e\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuild volume: 220 x 220 x 220 mm\u003c\/li\u003e\n\u003cli\u003eMax print speed: 300 mm\/s\u003c\/li\u003e\n\u003cli\u003eMax travel speed: 600 mm\/s\u003c\/li\u003e\n\u003cli\u003eMax acceleration: 20,000 mm\/s²\u003c\/li\u003e\n\u003cli\u003eLayer thickness: 0.1-0.4 mm\u003c\/li\u003e\n\u003cli\u003ePositioning precision - X\/Y-axis: 0.025 mm\u003c\/li\u003e\n\u003cli\u003ePositioning precision - Z-axis: 0.0025 mm\u003c\/li\u003e\n\u003cli\u003ePrint precision: ±0.2 mm (100 mm cube test)\u003c\/li\u003e\n\u003cli\u003eNozzle flow rate: 32 mm³\/s\u003c\/li\u003e\n\u003cli\u003eMax extruder temperature: 280°C\u003c\/li\u003e\n\u003cli\u003eMax platform temperature: 100°C\u003c\/li\u003e\n\u003cli\u003eNozzle diameter (default): 0.4 mm (0.25, 0.6, 0.8 mm optional)\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 1.75 mm\u003c\/li\u003e\n\u003cli\u003eCompatible filaments (0.4 mm nozzle): PLA, PETG\u003c\/li\u003e\n\u003cli\u003eCompatible filaments (0.6 mm nozzle): TPU, PLA-CF, PETG-CF\u003c\/li\u003e\n\u003cli\u003eMotion system: CoreXY\u003c\/li\u003e\n\u003cli\u003eExtruder type: Direct drive, single\u003c\/li\u003e\n\u003cli\u003eBuild plate: Double-sided flexible removable PEI steel plate\u003c\/li\u003e\n\u003cli\u003eDisplay: 4.3-inch touch LCD screen\u003c\/li\u003e\n\u003cli\u003eLevelling: Full-auto one-click (ADM system)\u003c\/li\u003e\n\u003cli\u003eConnectivity: Wi-Fi, Ethernet, USB\u003c\/li\u003e\n\u003cli\u003eSupported file formats (input): STL, OBJ, 3MF\u003c\/li\u003e\n\u003cli\u003eCompatible slicing software: FlashPrint 5, Orca-Flashforge, Orca Slicer, PrusaSlicer, Cura\u003c\/li\u003e\n\u003cli\u003eSupported OS: Windows 7+, Mac OS X 10.7+, Linux (Ubuntu 12.04+)\u003c\/li\u003e\n\u003cli\u003ePower supply: AC 100-120V \/ 200-240V, 50\/60 Hz, 350W\u003c\/li\u003e\n\u003cli\u003eDimensions (HxWxD): 413 x 363 x 376 mm (excluding display and spool holder)\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 10.8 kg (net)\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 1 year\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlashforge Adventurer 5M 3D printer (95% pre-assembled)\u003c\/li\u003e\n\u003cli\u003e0.4 mm nozzle assembly (installed)\u003c\/li\u003e\n\u003cli\u003eDouble-sided PEI flexible steel print plate (installed)\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eUSB cable\u003c\/li\u003e\n\u003cli\u003eQuick-start guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSetup and Care\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eGetting started:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Adventurer 5M arrives 95% pre-assembled. Attach any remaining components following the quick-start guide, power on the printer, and run the full-auto ADM levelling routine before your first print. Most users are printing within approximately 10 minutes of unboxing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConnecting to your network:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect via Wi-Fi or Ethernet using FlashPrint 5 or Orca-Flashforge on your computer, or use the FlashMaker app for remote monitoring and cloud printing. USB connection is also available for direct file transfer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNozzle care and swapping:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe quick-detach nozzle system allows tool-free swaps in around 3 seconds. Keep nozzles clean by purging filament residue when switching materials, and store unused nozzles in a dry location to avoid oxidation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePrint plate maintenance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe double-sided PEI steel plate is removable and flexible. Allow the bed to cool after printing before flexing the plate to release models cleanly. Wipe the plate surface with isopropyl alcohol periodically to maintain adhesion.\u003c\/p\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":57759342166389,"sku":"6937120321248","price":299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/5261\/5816\/files\/heavins-flashforge-adventurer-5m-corexy-3d-printer-black-10001135001-01.jpg?v=1794484298"}],"url":"https:\/\/www.heavins.ie\/collections\/flashforge.oembed","provider":"Heavins","version":"1.0","type":"link"}