Evolution Rage7-S Multi-Purpose Jigsaw 710W 240V | Evlrage7s

Evolution Rage7-S Multi-Purpose Jigsaw 710W 240V | Evlrage7s

Features

• Supplied with one pack of Jigsaw blades for multipurpose cutting.
  
• A powerful and versatile Jigsaw, capable of cutting many different materials. A large cutting capacity of up to 80mm thickness (wood). The ergonomic, soft-grip handle gives superb operator comfort and control. Fitted with a variable speed trigger control. Dial the speed you need, and then, for great operator convenience lock the trigger in place.
  
• Supplied with an adjustable parallel edge guide - a useful aid when cutting and trimming laminate flooring, where accurate parallel cuts are often needed. Removal (or installation) of the edge guide is easy, enabling a quick return to freehand cutting when required.
  
• Adjustable footplate (up to 45° right and left) allows bevel cutting - a very useful feature when cutting and fitting skirting board, architrave or coving. Positive stops are provided at 45°, 30°, 15° to both right hand and left-hand sides, and at 0°.
  
• Fitted with a quick release, tool-less chuck, which gives very rapid and easy installation or removal of the blade. A multipurpose jigsaw blade capable of cutting a wide variety of materials such as Steel, Aluminium, Wood, and Plastics, is included with this machine.
  
• Equipped with an air blower to blow dust away from the blade and the working area. Cutting lines are kept clear and readily visible aiding cutting accuracy. Also supplied with an adaptor tube that enables connection to a vacuum cleaner. Suck the dust away and keep your workplace clean and dust-free.

Specifications

• Motor (240V 50Hz): 710 W
  
• Speed No Load: 0 - 3000min-1
  
• Recommended Max Duty Cycle: 30 Minutes
  
• Stroke Length: 26mm
  
• Insulation Class: II
  
• Wood: 80mm
  
• Metal: 8mm
  
• Sound Pressure Level LPA: 87dB(A) K=3 dB(A)
  
• Sound Power Level LWA: 98dB(A) K=3 dB(A)
  
• Uncertainty K: 3:129/s2 K=1.5m/s2

Cutting Applications

• Wood
  Hardwood & tanalised decking, MDF laminates, mouldings, reclaimed wood with nails, scaffold boards & poles, stud-work. 
• Metal
  Mild Steel, angled, box section, square tube, metal stud dry walling, rebar, plate (1/4 inch), unistrut. 
• Non-Ferrous Metal
  Aluminium, armoured cables, cable tray, copper, floor edgings, roof flashings, stair nosings.
• Plastic
  Electrical conduit, plastic pipes, plexiglas, rubber & reinforced hoses, (WPC) Wood Plastic Composites. Evolution saw cutting stainless steel
• Not Recommended
  Hardened high carbon, coated and stainless steel. Note: Cutting galvanised steel may reduce blade life.

Includes

• Instruction Manual
  
• Hex Key 4mm
  
• Footplate Shoe
  
• Jigsaw Blades (1 Pack)
  
• Parallel Edge Guide
  
• Dust Extraction Adaptor
  
• Chip Guard (Front)
  
• Chip Guard (Footplate)
  
• Batteries ‘AAA’ x2