{"product_id":"eufymake-roll-to-film-attachment-for-uv-printer-e1-v7241010","title":"EufyMake Roll-to-film Attachment for UV Printer E1 | V7241010","description":"\u003cul\u003e\n\u003cli\u003eContinuous UV DTF printing up to 10 metres per run\u003c\/li\u003e\n\u003cli\u003eSubstrate widths from 100 mm to 305 mm supported\u003c\/li\u003e\n\u003cli\u003e3D-textured embossed output up to 1 mm high via Amass3D™\u003c\/li\u003e\n\u003cli\u003eIntelligent sensors for automatic roll alignment and feed\u003c\/li\u003e\n\u003cli\u003eAutomatic Cut-Off finishes prints without manual trimming\u003c\/li\u003e\n\u003cli\u003eColorMaestro™ colour management for waterproof, scratch-proof output\u003c\/li\u003e\n\u003cli\u003ePrint speed up to 10 sq ft per hour\u003c\/li\u003e\n\u003cli\u003eCompact at 5 kg - easy to store and transport\u003c\/li\u003e\n\u003cli\u003eIncludes canvas sheet and calipers for immediate use\u003c\/li\u003e\n\u003cli\u003eCompatible exclusively with the eufyMake E1 UV printer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 Months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 391 x 316 x 178 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eEufyMake Roll-to-Film Attachment - Up to 10 m Continuous UV DTF Printing for the E1\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eLong-Run Printing Without Industrial Equipment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Roll-to-Film Attachment converts the eufyMake E1 into a continuous-feed UV DTF printing system capable of producing runs up to 10 metres in a single pass. Substrates from 100 mm to 305 mm wide and 0.1 mm to 0.6 mm thick are supported, with a maximum roll diameter of 100 mm and a maximum roll weight of 2.5 kg. This makes it well suited to vehicle decals, event banners, retail signage, long label rolls, and sticker sheets without the cost or footprint of an industrial large-format press.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrecision Alignment and Automatic Finishing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntelligent sensors manage smooth roll loading and make real-time adjustments throughout the print run, syncing with the E1's built-in precision camera for accurate registration from start to finish. The integrated Automatic Cut-Off function trims each completed print cleanly without manual intervention. UV-cured inks, managed through the E1's ColorMaestro™ colour system, produce output that is waterproof, scratch-proof, and UV-resistant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3D-Textured Output on Flexible Film:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWorking in conjunction with the E1's Amass3D™ relief printing engine, the attachment supports embossed print heights of up to 1 mm on roll film, bringing tactile texture to sticker batches, posters, and decorative signage. Print speed reaches up to 10 sq ft per hour, with a recommended working temperature of 15°C to 35°C and humidity of 20% to 85% RH.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt Exclusively for the eufyMake E1:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis attachment is designed to work solely with the eufyMake E1 UV printer and is not compatible with other models. At 5 kg and 391 mm × 316 mm × 178 mm, it is compact enough to store and transport alongside the E1. The included 305 mm × 1 m canvas sheet and calipers allow you to get started straight from the box.\u003c\/p\u003e\n\u003cp\u003eShop the full \u003ca href=\"\/collections\/entertainment\" style=\"color: #2b00ff;\"\u003eEntertainment range\u003c\/a\u003e from Heavins.ie, with delivery available across Ireland.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eContinuous Print Length\u003c\/strong\u003e - up to 10 metres per run for banners, decals, and label rolls.\u003cbr\u003e\u003cstrong\u003eSubstrate Width Range\u003c\/strong\u003e - 100 mm to 305 mm, covering a broad range of roll film formats.\u003cbr\u003e\u003cstrong\u003eSubstrate Thickness Range\u003c\/strong\u003e - 0.1 mm to 0.6 mm for flexible film compatibility.\u003cbr\u003e\u003cstrong\u003eMaximum Embossed Print Height\u003c\/strong\u003e - 1 mm via the E1's Amass3D™ engine for 3D-textured output.\u003cbr\u003e\u003cstrong\u003eAutomatic Cut-Off\u003c\/strong\u003e - integrated mechanical finishing; no manual trimming required.\u003cbr\u003e\u003cstrong\u003eIntelligent Sensors\u003c\/strong\u003e - real-time roll loading adjustments and camera-synced registration.\u003cbr\u003e\u003cstrong\u003eColorMaestro™ Colour Management\u003c\/strong\u003e - waterproof, scratch-proof, UV-resistant UV-cured ink output.\u003cbr\u003e\u003cstrong\u003ePrint Speed\u003c\/strong\u003e - up to 10 sq ft per hour.\u003cbr\u003e\u003cstrong\u003eMaximum Roll Weight\u003c\/strong\u003e - 2.5 kg supported roll load.\u003cbr\u003e\u003cstrong\u003eCompact Form Factor\u003c\/strong\u003e - 5 kg net weight; stores and transports easily alongside the E1.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: eufyMake\u003c\/li\u003e\n\u003cli\u003eSKU: V7241010\u003c\/li\u003e\n\u003cli\u003eCompatible Printer: eufyMake E1 (exclusive)\u003c\/li\u003e\n\u003cli\u003eMaximum Print Length: 10 m\u003c\/li\u003e\n\u003cli\u003eSupported Substrate Width: 100 mm – 305 mm\u003c\/li\u003e\n\u003cli\u003eSupported Substrate Thickness: 0.1 mm – 0.6 mm\u003c\/li\u003e\n\u003cli\u003eMaximum Roll Diameter: 100 mm\u003c\/li\u003e\n\u003cli\u003eMaximum Roll Weight: 2.5 kg\u003c\/li\u003e\n\u003cli\u003eMaximum Embossed Print Height: 1 mm\u003c\/li\u003e\n\u003cli\u003ePrint Speed: Up to 10 sq ft per hour\u003c\/li\u003e\n\u003cli\u003ePost-Processing: Automatic Cut-Off\u003c\/li\u003e\n\u003cli\u003eWorking Temperature: 15°C – 35°C\u003c\/li\u003e\n\u003cli\u003eWorking Humidity: 20% – 85% RH\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eDimensions (WxDxH): 391 x 316 x 178 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 5 kg (net); 7 kg (including packaging)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 Months (main unit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eeufyMake Roll-to-Film Attachment × 1\u003c\/li\u003e\n\u003cli\u003eCanvas (305 mm × 1 m) × 1\u003c\/li\u003e\n\u003cli\u003eCalipers × 1\u003c\/li\u003e\n\u003cli\u003eLimited 1-Year Manufacturer Warranty documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup and Care\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGetting Started:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Roll-to-Film Attachment connects exclusively to the eufyMake E1 UV printer. Ensure the E1 is on a stable, level surface before attaching the unit, and use the included calipers to confirm substrate thickness is within the 0.1 mm to 0.6 mm supported range before loading your first roll.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoading Your Roll:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKeep roll weight at or below 2.5 kg and roll diameter at or below 100 mm for reliable feeding. The intelligent sensors will handle alignment automatically once loading begins, syncing with the E1's precision camera for registration throughout the run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorking Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOperate the attachment in an environment between 15°C and 35°C with relative humidity between 20% and 85%. Staying within these ranges helps maintain consistent ink adhesion and print registration across long runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsumables and Warranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse only eufyMake-supplied or eufyMake-authorised consumables and accessories. Using third-party inks or unauthorised materials will void warranty claims related to those consumables. The main unit carries a 12-month warranty from date of receipt; accessories and wear parts are not covered by the warranty but qualify for free replacement if damaged on arrival.\u003c\/p\u003e","brand":"EufyMake","offers":[{"title":"Default Title","offer_id":57354448830837,"sku":"0194644269210","price":499.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/5261\/5816\/files\/1_767x_8ec93bb9-9966-4f08-b1bd-5655fd3e187e.png?v=1784191374","url":"https:\/\/www.heavins.ie\/products\/eufymake-roll-to-film-attachment-for-uv-printer-e1-v7241010","provider":"Heavins","version":"1.0","type":"link"}