{"product_id":"flashforge-pla-basic-3d-printing-filament-1-75mm-1kg-roll-black-90004237002","title":"Flashforge PLA Basic 3D Printing Filament 1.75mm 1kg Roll - Black | 90004237002","description":"\u003cul\u003e\n\u003cli\u003e1.75mm PLA filament on a 1kg spool - Black\u003c\/li\u003e\n\u003cli\u003eDiameter tolerance ±0.03mm via CCD measurement\u003c\/li\u003e\n\u003cli\u003eBubble-Free extrusion and Neat Winding for tangle-free printing\u003c\/li\u003e\n\u003cli\u003eNozzle temperature 190-240°C, print speeds up to 250mm\/s\u003c\/li\u003e\n\u003cli\u003eCompatible with Bambu Lab, Creality, Flashforge and most FFF printers\u003c\/li\u003e\n\u003cli\u003ePlant-based, biodegradable material from renewable resources\u003c\/li\u003e\n\u003cli\u003eRoHS, REACH, and SDS certified\u003c\/li\u003e\n\u003cli\u003eBatch-tested on a 48-hour continuous print for quality assurance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Spool diameter: 200mm, hub hole: 52mm, spool width: 76mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFlashforge PLA Basic 1.75mm PLA Filament for 3D Printers\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eA reliable PLA filament for everyday 3D printing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlashforge PLA Basic is a 1.75mm diameter filament wound onto a 1kg spool, produced from renewable plant-based materials including cornstarch. It is RoHS, REACH, and SDS certified, making it one of the more responsibly sourced options in the standard filament category. Low odour and minimal warping make it a practical choice for beginners and experienced users alike.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConsistent diameter for clean, reliable extrusion:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlashforge manufactures PLA Basic in a dust-free workshop, using CCD (charge-coupled device) diameter measurement and self-adaptive control systems to keep 99% of the filament within a 1.75mm tolerance of ±0.03mm. The result is Bubble-Free extrusion, reduced nozzle clogging, and Neat Winding on the spool to prevent tangles during printing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTested under real printing conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEvery batch of Flashforge PLA Basic is tested by printing a large 3D model that requires a minimum of 48 hours of continuous printing at the thinnest layer height. This ensures the filament feeds consistently from start to finish, without mid-print failures that can waste both time and material.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWorks with most FFF 3D printers on the market:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePLA Basic is compatible with all FFF (Fused Filament Fabrication) printers that accept 1.75mm filament, including models from Bambu Lab (A1, P1, and X1 series) and Creality (K1C and Ender series), as well as Flashforge's own machines. The recommended nozzle temperature range of 190-240°C covers a wide variety of printer profiles, with higher temperatures recommended at faster print speeds.\u003c\/p\u003e\n\n\u003cp\u003eShop the full \u003ca href=\"\/collections\/printers\" style=\"color: #2B00FF;\"\u003ePrinters range\u003c\/a\u003e from Heavins.ie, with delivery available across Ireland.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003e\n\u003cstrong\u003eFilament Diameter\u003c\/strong\u003e - 1.75mm ±0.03mm, maintained via CCD measurement systems.\u003cbr\u003e\n\u003cstrong\u003eBubble-Free Extrusion\u003c\/strong\u003e - manufacturing controls reduce air pockets for consistent flow through the nozzle.\u003cbr\u003e\n\u003cstrong\u003eNeat Winding\u003c\/strong\u003e - spool is wound uniformly to prevent tangling and feeding issues during long prints.\u003cbr\u003e\n\u003cstrong\u003eLow Warping\u003c\/strong\u003e - PLA material properties keep parts flat on the build plate without an enclosure.\u003cbr\u003e\n\u003cstrong\u003eLow Odour\u003c\/strong\u003e - suitable for use in home, school, and office environments.\u003cbr\u003e\n\u003cstrong\u003ePlant-Based Material\u003c\/strong\u003e - produced from renewable resources including cornstarch; biodegradable.\u003cbr\u003e\n\u003cstrong\u003eWide Compatibility\u003c\/strong\u003e - works with Bambu Lab, Creality, Flashforge, and other FFF printers using 1.75mm filament.\u003cbr\u003e\n\u003cstrong\u003e48-Hour Print Test\u003c\/strong\u003e - every batch is tested on a large model printed at minimum layer height for quality assurance.\u003cbr\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e - RoHS, REACH, and SDS certified.\u003cbr\u003e\n\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFilament material: PLA (Polylactic Acid)\u003c\/li\u003e\n\u003cli\u003eFilament diameter: 1.75mm ±0.03mm\u003c\/li\u003e\n\u003cli\u003eNet weight: 1kg (2.2 lb)\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle temperature: 190-240°C\u003c\/li\u003e\n\u003cli\u003eRecommended build plate temperature: 25-60°C\u003c\/li\u003e\n\u003cli\u003eRecommended nozzle diameter: 0.4mm (0.6mm also compatible)\u003c\/li\u003e\n\u003cli\u003eLayer height: 0.12-0.3mm\u003c\/li\u003e\n\u003cli\u003ePrinting speed: 40-250mm\/s\u003c\/li\u003e\n\u003cli\u003eCooling fan: 50-100%\u003c\/li\u003e\n\u003cli\u003eRetraction length: 1-2mm\u003c\/li\u003e\n\u003cli\u003eRetraction speed: 30-50mm\/s\u003c\/li\u003e\n\u003cli\u003eHeat deflection temperature (HDT @ 0.455 MPa): 53°C (ISO 75)\u003c\/li\u003e\n\u003cli\u003eTensile strength (X-Y): 45-49 MPa (ISO 527)\u003c\/li\u003e\n\u003cli\u003eFlexural strength (X-Y): 69-75 MPa (ISO 178)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.25-1.26 g\/cm³ (ISO 1183)\u003c\/li\u003e\n\u003cli\u003eWater absorption (23°C\/24h): less than 0.3% (ISO 62)\u003c\/li\u003e\n\u003cli\u003eDrying conditions: 55°C for 8 hours (convection oven)\u003c\/li\u003e\n\u003cli\u003eStorage: room temperature to 40°C, 20% RH or below, sealed with desiccant\u003c\/li\u003e\n\u003cli\u003eSpool diameter: 200mm\u003c\/li\u003e\n\u003cli\u003eSpool hub hole: 52mm\u003c\/li\u003e\n\u003cli\u003eSpool width: 76mm\u003c\/li\u003e\n\u003cli\u003eCompatible support materials: self-supporting, PVA, BVOH\u003c\/li\u003e\n\u003cli\u003eCertifications: RoHS, REACH, SDS\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 Year\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Flashforge PLA Basic filament spool, 1.75mm, 1kg - Black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":57759326568821,"sku":"6937120314622","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0614\/5261\/5816\/files\/heavins-flashforge-pla-basic-3d-printing-filament-1-75mm-1kg-roll-black-90004237002-01.jpg?v=1794484304","url":"https:\/\/www.heavins.ie\/products\/flashforge-pla-basic-3d-printing-filament-1-75mm-1kg-roll-black-90004237002","provider":"Heavins","version":"1.0","type":"link"}