Landroid handles larger obstacles by bumping into them and turning around. TheAnti-Collision System (ACS)accessory is available as an add-on to help your Landroid sense obstacles via ultrasonic detection and navigate around them instead of running over or bumping into them. Smaller obstacles like dog toys or sticks will get run over by Landroid and could get caught in the cutting disc.

Yes, boundary wire is necessary to create a working area for your Landroid. Landroid will only operate within a boundary that is created by the boundary wire. Without boundary wire your Landroid would run into obstacles like fences and trees, enter flower beds, or in yards without a fence it will travel outside of your property.

The amount of time required to install your Landroid typically depends on the size of your lawn and number of obstacles. Generally, an installation can take anywhere from 3 to 5 hours.

If your front and back lawn are separated by a fence the Landroid must have a gate or a path to move through the fence. The Landroid can travel over a driveway to get to the secondary mowing area if needed, but the wires must be run through 2 separate expansion joints in the concrete. A secondary solution when Landroid is not able to pass through a fence would be to create a second boundary by purchasing an additional charging base station. The Landroid would need to be manually moved between the two areas.

We recommend fully charging the battery prior to its first use to ensure the battery will have its' full power. Avoid completely depleting the battery when using your tool. This will cut down the overall power capacity overtime. Also, avoid overcharging the battery, this will ruin the battery and can cause the battery to become defective. Once the battery is fully charged, please take it out and unplug the charger. We also recommend that the battery be charged at least once every 6 months when being stored away.

The Hydroshot is designed for use with fresh water sources, and using chemicals, cleansers, salt water or any other non-fresh water sources in it will void the warranty. For tough cleaning needs, the soap dispenser accessory can be used to mix any after-market cleaning solutions or liquid soaps. When using fresh water from a pool, lake, river or pond, slide the float along the hose to keep the intake away from the bottom to avoid picking up dirt or mud. When finished, flush the tool with ordinary tap water to ensure its longevity and performance.