Bluetti AC180P Portable Power Station 1800W 1400Wh ( Backup Battery ) | 281-PAC180PUKGYBL010

• 1,800W continuous AC output with Power Lifting Mode up to 2,700W
• 1,440Wh LiFePO4 battery - rated to 3,500+ cycles
• Turbo Charging: 0-80% in approximately 45 minutes
• 500W solar input via MC4 connector
• 11 output ports including USB-C 100W and 15W wireless charging
• Pass-through charging - power devices while recharging the unit
• UPS mode with 20 ms switchover for home backup use
• Silent Mode at 45 dB - suitable for tent, van, or bedroom use
• BLUETTI App control via Bluetooth
• Manufacturer warranty: 5 years
• Dimensions: 317 x 340 x 247 mm

Bluetti AC180P Portable Power Station for Camping, Home Backup and Off-Grid Use

Reliable power wherever you need it:

The Bluetti AC180P delivers 1,800W of continuous AC output from a 1,440Wh LiFePO4 battery, giving you enough capacity to run a fridge for up to 20 hours, a CPAP machine overnight, or a range of power tools and kitchen appliances on site or at camp. The LiFePO4 chemistry is rated to 3,500+ charge cycles to 80% of original capacity, making this a long-serving unit for both regular travellers and households keeping it as a backup power source.

Power Lifting Mode for high-draw appliances:

The AC180P includes BLUETTI's Power Lifting Mode, which boosts the output ceiling from 1,800W to 2,700W for resistive heating loads such as electric kettles, hair dryers, and space heaters. This means appliances that would ordinarily exceed a standard portable power station's inverter limit can be used without issue. The inverter is a Pure Sine Wave type, safe for sensitive electronics including laptops, medical devices, and televisions.

Turbo Charging gets you back to full quickly:

With Turbo Charging enabled, the AC180P accepts up to 1,440W of AC input, reaching 0–80% capacity in approximately 45 minutes. For situations where quieter operation matters - a tent, a van, or a bedroom - Silent Mode reduces the fan noise to 45 dB at the cost of a slower 260W charge rate, typically completing a full charge in 4.9 to 5.4 hours. Standard Mode sits in between at around 1,000W input and a 1.7 to 2.2 hour full charge time.

Flexible charging inputs including solar:

The AC180P accepts up to 500W of solar input (12V to 60V DC, 10A, MC4 connector), which can take the unit from 0–80% in approximately 1.5 hours under good conditions. Car charging via the 12V/24V input is also supported, with recharge times ranging from around 6.3 hours at 200W to 12 hours at 100W. Pass-through charging means any devices connected to the output ports continue to receive power while the AC180P itself is recharging.

Eleven output ports for simultaneous use:

The unit carries 11 output ports: 2 AC sockets (230V, 1,800W total), 1 USB-C at 100W, 4 USB-A ports (15W total across two pairs), a 12V/10A car outlet, and a 15W wireless charging pad on top of the unit. The BLUETTI App connects via Bluetooth to allow real-time monitoring of input, output, and battery state, as well as remote control of charging modes. UPS mode is available with a 20 ms switchover time, suitable for desktop computers and basic home equipment during a power outage.

Shop the Power Stations & Solar range from Heavins.ie, with delivery available across Ireland.

Key Features

1,800W Pure Sine Wave AC Output - runs fridges, microwaves, power tools, and sensitive electronics safely.
Power Lifting Mode - boosts peak output to 2,700W for resistive loads such as kettles and hair dryers.
1,440Wh LiFePO4 Battery - rated to 3,500+ cycles to 80% capacity for long-term reliability.
Turbo Charging - charges from 0 to 80% in approximately 45 minutes via 1,440W AC input.
500W Solar Input - MC4 connector, 12V–60V DC, 10A; compatible with most solar panels.
11 Output Ports - 2 AC, 4 USB-A, 1 USB-C (100W), 1 car outlet, 1 wireless charging pad (15W).
Pass-Through Charging - connected devices continue to receive power while the unit recharges.
UPS Mode - 20 ms switchover time to protect equipment during mains power outages.
Silent Mode - fan noise of 45 dB for low-disturbance charging in tents, vans, or bedrooms.
BLUETTI App - Bluetooth connectivity for real-time monitoring and charging mode control.
MPPT Controller and BMS - optimises solar input and protects the battery from overcharge and over-discharge.
UKCA and CE Certified - meets UK and EU conformity requirements.

Specifications

• Capacity: 1,440Wh (36Ah)
• Cycle life: 3,500+ cycles to 80% original capacity
• AC output: 2 × 230V / 7.8A, 1,800W total (Pure Sine Wave)
• Peak output (Power Lifting Mode): 2,700W
• USB-C output: 1 × 100W max
• USB-A output: 4 ports (2 pairs × 5VDC / 3A, 15W total per pair)
• Car outlet: 1 × 12V / 10A
• Wireless charging pad: 1 × 15W max
• Total output ports: 11
• AC input (Turbo Mode): up to 1,440W
• AC input (Standard Mode): up to 1,000W
• Solar input: 500W max, 12V–60V DC, 10A, MC4 connector
• Car input: 12V/24V DC
• Charge time (Turbo, 0–80%): approx. 45 minutes
• Charge time (Turbo, full): approx. 1.3–1.8 hours
• Charge time (Standard, full): approx. 1.7–2.2 hours
• Charge time (Silent, full): approx. 4.9–5.4 hours
• Silent Mode noise level: 45 dB
• UPS switchover time: 20 ms
• Connectivity: Bluetooth (BLUETTI App)
• Operating temperature (charging): 0°C to 40°C
• Operating temperature (discharging): -20°C to 40°C
• Certifications: UKCA, CE, UL, PSE, TELEC, RCM, CA65
• Weight: approx. 16 kg
• Dimensions (HxWxD): 317 x 340 x 247 mm
• Manufacturer warranty: 5 years

What's Included in the Box

• 1 × Bluetti AC180P Portable Power Station
• 1 × AC charging cable (16AWG, 1,800mm)
• 1 × Car charging cable (16AWG, 720mm)
• 1 × Solar charging cable (16AWG, 1,500mm)
• 1 × Grounding screw (M5×10)
• 1 × User manual

Setup and Care

Getting started:

Connect the AC charging cable to a standard 230V mains socket to begin charging. Download the free BLUETTI App on your smartphone and pair via Bluetooth to monitor battery level, input/output wattage, and to switch between Turbo, Standard, and Silent charging modes from your phone.

Charging with solar panels:

Connect compatible solar panels (12V–60V DC, MC4 connector) directly to the solar input port. The built-in MPPT Controller automatically optimises the power drawn from your panels. For best results, position panels in direct sunlight and check the BLUETTI App for live solar input readings.

Using as a UPS:

Plug the AC180P into the mains and connect your equipment to its AC output sockets. The unit will pass mains power through to your devices and switch to battery power within 20 ms in the event of a mains outage, keeping computers, routers, and other equipment running without interruption.

Storage and maintenance:

For long-term storage, keep the battery charged to between 30% and 80% and store the unit in a dry environment between -20°C and 40°C. BLUETTI recommends recharging to at least 80% every 3 to 6 months to maintain battery health during periods of non-use.

We are pleased to offer FREE delivery on orders over €499.00 to anywhere in the Republic of Ireland and Northern Ireland, and our Click & Collect service is FREE on all orders.

All items are shipped from the Athlone Warehouse in Co. Westmeath, Ireland so no import duties apply to the island of Ireland.

Delivery Costs to Republic of Ireland are €6.99 for orders Under €499.00

Same Day Dispatch €9.99
Orders placed before 12pm are dispatched the same working day, helping your items reach you sooner. Excludes bulky items.

Large Bulky Items
Please be aware that large, bulky items (large appliances, white goods, etc.) have a delivery charge of €39.99 for bulky items or €59.99 for extra bulky items to ROI

- We are now delivering to Northern Ireland with all delivery costs equal to the Republic of Ireland.

View our full Delivery & Collection information

Due to our valued customer feedback, we have updated and improved our Returns Policy.

We now offer an exhange or refund on goods purchased online, and returned 14 days after purchase.

View our Full Returns Policy