Gorilla Glue Grab Adhesive and Seal All Purpose 290ml - White | 119373

• Two-in-one grab adhesive and sealant in a single cartridge
• 290ml cartridge covers up to 15 metres at 14mm bead size
• Grabs in minutes - no clamping or bracing required
• 100% waterproof and mould resistant indoors and outdoors
• Paintable after 30 minutes; sandable and drillable after 24 hours
• Flexible formula fills gaps with little to no shrinkage
• Cured seal holds between -40°C and 93°C
• Bonds wood, metal, brick, stone, ceramic, plasterboard, and most plastics

Gorilla Grab & Seal 290ml white hybrid polymer adhesive and sealant - two-in-one cartridge for interior and exterior use

A grab adhesive and sealant in a single cartridge:

Gorilla Grab & Seal combines the holding strength of a grab adhesive with the flexibility and moisture resistance of a sealant, so you only need one product for jobs that would normally require two. Each 290ml cartridge covers up to 15 metres using a 14mm bead, making it well suited to longer runs such as skirting boards, architrave, worktop joints, and shower enclosures.

Bonds quickly and holds without clamping:

The high-tack hybrid polymer formula grabs within minutes of application, removing the need for mechanical bracing or clamps while the adhesive sets. Press surfaces together within 10 minutes of applying and hold for 20 to 60 seconds. Open working time is 20 to 30 minutes, and the seal can be exposed to water after just 30 minutes. Full cure takes at least 24 hours.

Flexible, gap-filling, and fully waterproof:

Once cured, the flexible formula moves with temperature changes between -40°C and 93°C without cracking or losing its seal. It fills voids and gaps with little to no shrinkage - for gaps larger than 12mm, use a backer rod for best results. The cured adhesive is 100% waterproof, mould resistant, and suitable for both interior and exterior applications in all weather conditions.

Paintable, sandable, and drillable after cure:

The white finish can be painted after 30 minutes and is fully sandable, stainable, drillable, and tapable after 24 hours, making it straightforward to finish and decorate over. It works on wood, metal, brick, stone, ceramic, plasterboard, and most plastics. Not suitable for use on polypropylene (PP), polyethylene (PE), bitumen, or non-stick surfaces.

Shop the full Painting & Decorating range from Heavins.ie, with delivery available across Ireland.

Key Features

Two-in-one formula - combines grab adhesive strength with flexible sealant performance in a single cartridge.
290ml capacity - covers up to 15 metres using a 14mm bead size.
High initial tack - grabs quickly; no mechanical clamping required during cure.
Open working time - 20 to 30 minutes from application.
Water exposure - can be exposed to water after 30 minutes; full cure in 24 hours.
Temperature resistance - once cured, holds strong between -40°C and 93°C.
Application temperature - best applied above 5°C; can be applied between -40°C and 37°C.
100% waterproof - mould and mildew resistant; suitable for interior and exterior use.
Gap filling - flexible formula fills voids with little to no shrinkage; use backer rod for gaps over 12mm.
Paintable after 30 minutes - sandable, stainable, drillable, and tapable after 24 hours.
Compatible surfaces - wood, metal, brick, stone, ceramic, plasterboard, and most plastics.
Low odour - suitable for use in enclosed spaces such as kitchens and bathrooms.

Specifications

• Brand: Gorilla Glue
• Product Name: Gorilla Grab & Seal
• Volume: 290ml
• Colour: White
• Formula Type: Hybrid polymer
• Coverage: Up to 15 metres (14mm bead size)
• Application Temperature: -40°C to 37°C (best above 5°C)
• Service Temperature (cured): -40°C to 93°C
• Open Working Time: 20 to 30 minutes
• Water Exposure: After 30 minutes
• Full Cure Time: 24 hours minimum
• Waterproof: Yes - 100% waterproof
• Mould Resistant: Yes
• Paintable: Yes - after 30 minutes
• Sandable/Drillable/Tapable: Yes - after 24 hours
• Gap Filling: Yes - use backer rod for gaps over 12mm
• Location: Interior and exterior
• Odour: Low odour
• Compatible Surfaces: Wood, metal, brick, stone, ceramic, plasterboard, most plastics
• Not Suitable For: PP, PE, bitumen, non-stick surfaces
• Application Method: Cartridge gun (not included)
• Food Safe: No
• Weight: 533g
• EAN: 5704947002527
• Warranty: 1 Year

What's Included in the Box

• 1 x 290ml Gorilla Grab & Seal cartridge with nozzle
• Note: a standard cartridge gun is required for application and is not included

We are pleased to offer FREE delivery on orders over €499.00 to anywhere in the Republic of Ireland and Northern Ireland, and our Click & Collect service is FREE on all orders.

All items are shipped from the Athlone Warehouse in Co. Westmeath, Ireland so no import duties apply to the island of Ireland.

Delivery Costs to Republic of Ireland are €6.99 for orders Under €499.00

Same Day Dispatch €9.99
Orders placed before 12pm are dispatched the same working day, helping your items reach you sooner. Excludes bulky items.

Large Bulky Items
Please be aware that large, bulky items (large appliances, white goods, etc.) have a delivery charge of €39.99 for bulky items or €59.99 for extra bulky items to ROI

- We are now delivering to Northern Ireland with all delivery costs equal to the Republic of Ireland.

View our full Delivery & Collection information

Due to our valued customer feedback, we have updated and improved our Returns Policy.

We now offer an exhange or refund on goods purchased online, and returned 14 days after purchase. 

View our Full Returns Policy